service@lencolo37.com |
+86 18027002837(WhatsApp)
Search for Products.
In the world of industrial and commercial flooring, the final appearance and durability of a floor depend on more than just resin quality and application technique. One of the most overlooked but critical factors is foam control.
Bubbles may be tiny, but their impact is huge. Microbubbles trapped during mixing, coating, or curing can cause pinholes, craters, uneven gloss, and even compromise the long-term wear resistance of the floor. Once cured under UV light, these imperfections become locked into the surface—affecting not only aesthetics but also performance.
This is where our Flooring-Grade UV Defoamer steps in.
At our production facility, we don't just produce additives—we engineer performance you can trust. Every batch of our flooring-grade UV defoamer undergoes multiple layers of testing before it reaches our clients.
Foam Suppression Efficiency – Proven to eliminate both macro- and microfoam in high-viscosity UV coatings and 100% solids systems. PASS
Compatibility with UV Resins – Tested with a wide range of acrylates, oligomers, monomers, and photoinitiators without adverse reactions. PASS
Surface Appearance Control – Effectively prevents craters, fisheyes, and haze under industrial UV curing conditions. PASS
Long-Term Stability – Maintains efficiency even after 6–12 months of storage without separation or loss of activity. PASS
Environmental & Safety Compliance – Low VOC, RoHS and REACH compliant, suitable for green building requirements. PASS
These aren't just numbers—they are the guarantees that our clients rely on when delivering premium flooring solutions.
UV-cured flooring systems—whether used in industrial workshops, hospitals, showrooms, or high-traffic commercial areas—are valued for their fast curing, durability, and low VOC emissions.
However, the curing speed of UV coatings leaves no time for defects to “flow out” naturally. If foam isn’t addressed during application, it becomes permanently embedded. This can lead to:
Reduced mechanical strength
Shorter service life
Increased cleaning and maintenance costs
Higher rejection rates and rework expenses
By integrating a high-performance UV defoamer into your formulation, you can prevent these problems before they occur—saving time, money, and your brand reputation.
As a professional manufacturer of UV-curable additives, we believe our responsibility goes beyond simply meeting specifications. We see ourselves as your partner in delivering floors that meet the highest global standards—both visually and technically.
For flooring manufacturers and applicators, choosing the right defoamer is not just a technical decision. It’s a decision that influences the customer’s first impression, the project’s long-term performance, and your ability to deliver on time without costly rework.
That’s why we:
Work closely with R&D teams to customize formulations for different resin systems
Maintain strict quality control over raw materials and production
Keep our products free from unnecessary hazardous substances
Support our clients with technical guidance for real-world application challenges
With our Flooring-Grade UV Defoamer, contractors, coating manufacturers, and floor system integrators across Southeast Asia, Europe, and beyond can work with complete confidence—knowing that every square meter will look as good as it performs.
From high-gloss showroom floors to heavy-duty industrial surfaces, our defoamer ensures smooth, defect-free results—batch after batch, project after project.
If you're ready to eliminate bubbles, reduce rework, and elevate your UV-cured flooring systems to the next level, our team is ready to help.
Contact us today to discuss your flooring project needs and request a free technical consultation.
#UVdefoamer #FlooringAdditives #UVCuredFloorCoating #AntiFoamAgent #FloorCoatingAdditive
#IndustrialFlooring #BubbleFreeFloor #LowVOCAdditive #UVCoatingSolutions #ResinAdditives
